IBM Tivoli Enablement Tools
Comment and issues for the ITIM DocTool
This thread is for comments and issues regarding the ITIM DocTool. DocTool - For ITIM http://www-01.ibm.com/software/brandcatalog/portal/opal/details?catalog.label=1TW10IM0C DocTool - For ITIM Express http://www-01.ibm.com/software/brandcatalog/portal/opal/details?catalog.label=1TW10IM0F
Hello #All, Is there any documentation or how to available for using doctool in a environment where SSL only communications is enabled between TIM and TDS. Sincerely Volker Lätzer
SystemAdmin 110000D4XK 2008-11-08T11:06:46Z Hello #All, Is there any documentation or how to available for using doctool in a environment where SSL only communications is enabled between TIM and TDS. Sincerely Volker Lätzer More... Since the ITIM DocTool uses all ITIM API's, I don;t think there should be anything special you have to do to use it on an SSL based ITIM. What version of ITIM/DocTool are you using and what type of issue are you seeing? Dave
streetglide 100000NCCU 2008-11-10T15:22:06Z Since the ITIM DocTool uses all ITIM API's, I don;t think there should be anything special you have to do to use it on an SSL based ITIM. What version of ITIM/DocTool are you using and what type of issue are you seeing? Dave More... I am using ITIMDocTool for TIM 5.0 If it will be started, directly after installation, it will check the enRoleLDAPConnection.properties for the configured LDAP connection settings. The start will fail and do not create an output file as long as the ssl configuration is set in the enRoleLDAPConnection.properties file. Have found a workaround by faking that settings to non SSL for the runtime of the doc tool. Now I am interested in a more solid solution Sincerely Volker Lätzer
Downloaded the version for ITIM 4.6, looking for some sort of install doc and found the Readme. I assume that since the output is html or xml a browser is required. I also assume that the package must be installed on the ITIM server ( no browsers enabled ) . Since the systems are only available via remote desktop this could be an issue. Other that the Readme_wls.txt file is there something else that gives a little more detail on getting it running? Thanks
SystemAdmin 110000D4XK 2009-04-01T13:00:23Z Downloaded the version for ITIM 4.6, looking for some sort of install doc and found the Readme. I assume that since the output is html or xml a browser is required. I also assume that the package must be installed on the ITIM server ( no browsers enabled ) . Since the systems are only available via remote desktop this could be an issue. Other that the Readme_wls.txt file is there something else that gives a little more detail on getting it running? Thanks More... DocTool is a command line application that uses internal ITIM APIs. Therefore, it must run on the ITIM server. The output is a single HTML or XML file. The resulting file can be copied or emailed to a computer with a browser. The file is fully self contained and does not contain links to any files. As far as install, the Readme_wls.txt is only for customers using the old WebLogic server (which should be pretty much nobody). If you are using WAS then use the Readme.txt. The ITIMDocTool_HTML.cmd/sh files contain paths that must point to you ITIM and WAS install areas. There isn't anything special about running it. Simply execute the appropriate command file and the output file will be generated. Some customers setup a cron job and have the file emailed or placed in an externally available directory. Then you can setup a web link to it. Dave
streetglide 100000NCCU 2009-04-01T13:19:23Z DocTool is a command line application that uses internal ITIM APIs. Therefore, it must run on the ITIM server. The output is a single HTML or XML file. The resulting file can be copied or emailed to a computer with a browser. The file is fully self contained and does not contain links to any files. As far as install, the Readme_wls.txt is only for customers using the old WebLogic server (which should be pretty much nobody). If you are using WAS then use the Readme.txt. The ITIMDocTool_HTML.cmd/sh files contain paths that must point to you ITIM and WAS install areas. There isn't anything special about running it. Simply execute the appropriate command file and the output file will be generated. Some customers setup a cron job and have the file emailed or placed in an externally available directory. Then you can setup a web link to it. Dave More... Dave, Had to jump through a few hoops but good to go, thank you Steve
Hi, I downloaded ITIMDocToolInstaller_50.sh from http://www-01.ibm.com/software/brandcatalog/portal/opal/details?catalog.label=1TW10IM0C on my PC and moved ITIMDocToolInstaller_50.sh on ITIM Server (AIX 5.3) using FTP in binary mode. Now when I'm trying to run ITIMDocToolInstaller_50.sh, I got following error message: ./ITIMDocToolInstaller_50.sh gunzip: sfx_archive.tar.gz: not in gzip format I am sorry, but the installer file seems to be corrupted. If you downloaded that file please try it again. If you transfer that file with ftp please make sure that you are using binary mode. # Any ideas?
SystemAdmin 110000D4XK 2009-04-15T09:04:28Z Hi, I downloaded ITIMDocToolInstaller_50.sh from http://www-01.ibm.com/software/brandcatalog/portal/opal/details?catalog.label=1TW10IM0C on my PC and moved ITIMDocToolInstaller_50.sh on ITIM Server (AIX 5.3) using FTP in binary mode. Now when I'm trying to run ITIMDocToolInstaller_50.sh, I got following error message: ./ITIMDocToolInstaller_50.sh gunzip: sfx_archive.tar.gz: not in gzip format I am sorry, but the installer file seems to be corrupted. If you downloaded that file please try it again. If you transfer that file with ftp please make sure that you are using binary mode. # Any ideas? More... I downloaded the file this morning. I copied it to an AIX box using FileZilla in binary mode. I was able to successfully run and install DocTool. I would suggest you redownload the file and also make sure you copy it to the AIX box in binary mode. OUTPUT from DocTool on AIX: Output file: ITIMReport.html Project file Loaded... Loaded report, running... Initializing report... Loading templates Processing section Summary Processing section Properties Processing section Roles Processing section Organization 0 org entries not found No Password Policies found No Host Selection Policies found Processing section Services Processing section Policies Processing section Provisioning Policies Processing section Adoption Policies Processing section Password Policies Processing section Service Selection Policies Processing section Recertification Policies Processing section Workflows Processing section Account Request Workflows Processing section Access Request Workflows Processing section System Security Processing section Groups Processing section Access Control Information Processing section Views Processing section Security Properties Processing section Forgotten Password Settings Processing section System Configuration Processing section Service Types Processing section Access Types Processing section Global Adoption Policies Processing section Workflow Notification Properties Processing section Post Office Processing section Entities Processing section Operations Processing section Entity Type Level Processing section Entity Level Processing section LifeCycle Rules Processing section Entity Type Level Processing section Entity Level Processing section Global Policy Enforcement Report Complete
streetglide 100000NCCU 2009-04-15T11:12:50Z I downloaded the file this morning. I copied it to an AIX box using FileZilla in binary mode. I was able to successfully run and install DocTool. I would suggest you redownload the file and also make sure you copy it to the AIX box in binary mode. OUTPUT from DocTool on AIX: Output file: ITIMReport.html Project file Loaded... Loaded report, running... Initializing report... Loading templates Processing section Summary Processing section Properties Processing section Roles Processing section Organization 0 org entries not found No Password Policies found No Host Selection Policies found Processing section Services Processing section Policies Processing section Provisioning Policies Processing section Adoption Policies Processing section Password Policies Processing section Service Selection Policies Processing section Recertification Policies Processing section Workflows Processing section Account Request Workflows Processing section Access Request Workflows Processing section System Security Processing section Groups Processing section Access Control Information Processing section Views Processing section Security Properties Processing section Forgotten Password Settings Processing section System Configuration Processing section Service Types Processing section Access Types Processing section Global Adoption Policies Processing section Workflow Notification Properties Processing section Post Office Processing section Entities Processing section Operations Processing section Entity Type Level Processing section Entity Level Processing section LifeCycle Rules Processing section Entity Type Level Processing section Entity Level Processing section Global Policy Enforcement Report Complete More... Hi, I tried again but with same failed results. I wonder what is the transfer mode when I download the tool, because the tool name ends with .sh (ITIMDocToolInstaller_50.sh). I'm sure I'm using binary mode when I ftp'ed file from PC to AIX. If it doesn't bother you too much, would it be possible for you to send me (hannu.niittymaa#fi.ibm.com) the doctool (ITIMDocToolInstaller_50.sh) by email, so that I could try that version?
SystemAdmin 110000D4XK 2009-04-20T12:09:40Z Hi, I tried again but with same failed results. I wonder what is the transfer mode when I download the tool, because the tool name ends with .sh (ITIMDocToolInstaller_50.sh). I'm sure I'm using binary mode when I ftp'ed file from PC to AIX. If it doesn't bother you too much, would it be possible for you to send me (hannu.niittymaa#fi.ibm.com) the doctool (ITIMDocToolInstaller_50.sh) by email, so that I could try that version? More... Hi, The ITIM DocTool is very useful but I wanted to know how it can manage the accents ? Actually a "é" character is displayed as "é" in the HTML output, I can replace manually each accent character but it would be useful to have the right characters each time I rebuild the HTML output. Thanks for your help Sylvain
SystemAdmin 110000D4XK 2009-04-21T09:34:30Z Hi, The ITIM DocTool is very useful but I wanted to know how it can manage the accents ? Actually a "é" character is displayed as "é" in the HTML output, I can replace manually each accent character but it would be useful to have the right characters each time I rebuild the HTML output. Thanks for your help Sylvain More... On running the tool, I get the following output: [root#machinename ITIMDocTool]# ./ITIMDocTool_HTML.sh Output file: ITIMReport.html Project file Loaded... Loaded report, running... Initializing report... Loading templates Processing section Summary Processing section Properties Processing section Roles Processing section Organization 0 org entries not found No Password Policies found No Host Selection Policies found Processing section Services Error running report: null Contents of DocTool.log are: 2009-07-16 13:06:26,014 INFO [DocToolProject ] - Project Loaded 2009-07-16 13:06:26,084 INFO [DocToolSection ] - Processing section... Summary 2009-07-16 13:06:32,679 INFO [DocToolSection ] - Processing section... Properties 2009-07-16 13:06:32,688 INFO [DocToolSection ] - Processing section... Roles 2009-07-16 13:06:32,814 INFO [DocToolSection ] - Processing section... Organization 2009-07-16 13:06:32,900 DEBUG [ITIMDocToolUtils ] - No Recertification Policies found 2009-07-16 13:06:32,944 INFO [DocToolSection ] - Processing section... Services 2009-07-16 13:06:34,206 ERROR [DocToolList ] - Error initializing component Configuration Details: null 2009-07-16 13:06:34,206 ERROR [DocToolProject ] - Error running report: null 2009-07-16 13:06:34,207 INFO [DocToolProject ] - Report Complete Does anyone have an idea how to fix this / troubleshoot this? I've tried fiddling with the WAS / TIM paths in the .sh file, but all seems fine. Operating system is Linux 64-bit (shouldn't matter). Thanks!
allunderone 270001J146 2009-07-16T07:12:42Z On running the tool, I get the following output: <pre class="jive-pre"> [root#machinename ITIMDocTool]# ./ITIMDocTool_HTML.sh Output file: ITIMReport.html Project file Loaded... Loaded report, running... Initializing report... Loading templates Processing section Summary Processing section Properties Processing section Roles Processing section Organization 0 org entries not found No Password Policies found No Host Selection Policies found Processing section Services Error running report: null </pre> Contents of DocTool.log are: <pre class="jive-pre"> 2009-07-16 13:06:26,014 INFO [DocToolProject ] - Project Loaded 2009-07-16 13:06:26,084 INFO [DocToolSection ] - Processing section... Summary 2009-07-16 13:06:32,679 INFO [DocToolSection ] - Processing section... Properties 2009-07-16 13:06:32,688 INFO [DocToolSection ] - Processing section... Roles 2009-07-16 13:06:32,814 INFO [DocToolSection ] - Processing section... Organization 2009-07-16 13:06:32,900 DEBUG [ITIMDocToolUtils ] - No Recertification Policies found 2009-07-16 13:06:32,944 INFO [DocToolSection ] - Processing section... Services 2009-07-16 13:06:34,206 ERROR [DocToolList ] - Error initializing component Configuration Details: null 2009-07-16 13:06:34,206 ERROR [DocToolProject ] - Error running report: null 2009-07-16 13:06:34,207 INFO [DocToolProject ] - Report Complete </pre> Does anyone have an idea how to fix this / troubleshoot this? I've tried fiddling with the WAS / TIM paths in the .sh file, but all seems fine. Operating system is Linux 64-bit (shouldn't matter). Thanks! More... I have seen this error when you have a service profile that does not have any form defined in ITIM. I will try to get this fixed in the next release but in the meantime, check to see that all of you profiles (usually a custom one) have forms defined. Dave
streetglide 100000NCCU 2009-07-16T10:31:24Z I have seen this error when you have a service profile that does not have any form defined in ITIM. I will try to get this fixed in the next release but in the meantime, check to see that all of you profiles (usually a custom one) have forms defined. Dave More... I managed to get it working by making a change in ITIMReportDefinition.xml and disabling the services list. Of course, no listing for services then. We don't have any custom service profiles, and all service profiles have pages in place for them. Thanks!
Hello everyone ! I met a error when executing DocTool, as check Organizational structure haven't write to html report. Could you help troubleshoot this problem? ++++++++++++++++ ./ITIMDocTool_HTML_WLS.sh Output file: itimdoc.htm Version: 2.0 Report Properties File: ITIMDocTool_HTML.properties Exception in thread "main" java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:393) at com.ibm.itim.dataservices.model.domain.OrganizationalContainerObjectFactory.createObject(OrganizationalContainerObjectFactory.java:127) at com.ibm.itim.dataservices.result.LDAPSearchResults.addResult(LDAPSearchResults.java:286) at com.ibm.itim.dataservices.result.LDAPSearchResults.enumerateAll(LDAPSearchResults.java:233) at com.ibm.itim.dataservices.result.LDAPSearchResults.size(LDAPSearchResults.java:167) at com.ibm.itim.customizations.DocTool.OrgTreeReportItem.processOrgTree(OrgTreeReportItem.java:109) at com.ibm.itim.customizations.DocTool.OrgTreeReportItem.formatDetailLine(OrgTreeReportItem.java:80) at com.ibm.itim.customizations.DocTool.DocReport.processOrgTree(DocReport.java:426) at com.ibm.itim.customizations.DocTool.DocReport.generateReport(DocReport.java:50) at ITIMDocTool.main(ITIMDocTool.java:47) ++++++++++++++++
When ITIM is configured to use SSL to connect to the ITIM LDAP (The enRoleLDAPConnection.properties file contains java.naming.provider.url=ldap://xx:636 java.naming.security.protocol=ssl) DocTool 5.0 and 5.1 fails Loading templates Processing section Summary Error running report: ModelCommunicationException while getting the default tenant: CTGIMO014E Communication Failure. The directory server is not available. Error: xx.ibm.com:636 Report Complete When I change the enRoleLDAPConnection.properties file not to use SSL it works (java.naming.provider.url=ldap://xx.ibm.com:389 #java.naming.security.protocol=ssl) Is there a fix or work around for this?
ITIM DocTools 5.1 on AIX is installed in a folder on the ITIM server and the ownership of the installed files match the ownership of the ITIM_HOME (itimuser). We are running MSSL on all connections with ITIM. We execute the ITIMDocTools.sh logged in as itimuser and are getting the error: "Error getting roles" Any ideas?
DainBramaged 060000UA5D 2010-08-11T16:00:29Z ITIM DocTools 5.1 on AIX is installed in a folder on the ITIM server and the ownership of the installed files match the ownership of the ITIM_HOME (itimuser). We are running MSSL on all connections with ITIM. We execute the ITIMDocTools.sh logged in as itimuser and are getting the error: "Error getting roles" Any ideas? More... The obvious question is: Did you look in the log file? Is there any stack trace? If you are using SSL, the doctool runs as a standard java process. If you are using a cert that is self signed and not issued by the various standard CAs, then the java cert store will not be able to validate the cert and there is no UI for doctool to prompt you like a browser does. You would have to add your CA info to the JVM cert store. Here is a good reference: http://www.cs.uccs.edu/~cs301/j2ee/j2eetutorial14/doc/Security6.html
Hi, We have a problem running the great DocTool on AIXv6.1... The tools runs fine in Test environment, on PRD however, we get below output. Any ideas on what's wrong? 2010-11-19 09:57:19,095 INFO DocToolProject - Project Loaded 2010-11-19 09:57:19,301 INFO DocToolSection - Processing section... Properties 2010-11-19 09:57:19,604 INFO DocToolSection - Processing section... Roles 2010-11-19 09:57:19,639 DEBUG ITIMDocToolUtils - Retrieving Org Roles 2010-11-19 09:57:20,063 DEBUG ITIMDocToolUtils - Tenant DN is ou=EPT,dc=ept,dc=com 2010-11-19 09:57:35,605 DEBUG ITIMDocToolUtils - Retrieving Provisioning Policies 2010-11-19 09:57:38,323 INFO DocToolSection - Processing section... Organization 2010-11-19 09:57:38,345 DEBUG ITIMDocToolUtils - Retrieving ITIM Groups 2010-11-19 09:57:38,364 DEBUG ITIMDocToolUtils - Retrieving Services 2010-11-19 09:57:38,554 DEBUG ITIMDocToolUtils - Retrieving Identity Policies 2010-11-19 09:57:38,622 DEBUG ITIMDocToolUtils - Retrieving Password Policies 2010-11-19 09:57:38,674 DEBUG ITIMDocToolUtils - Retrieving Adoption Policies 2010-11-19 09:57:38,734 DEBUG ITIMDocToolUtils - Retrieving recertification Policies 2010-11-19 09:57:38,785 DEBUG ITIMDocToolUtils - Retrieving SOD Policies 2010-11-19 09:57:38,835 DEBUG ITIMDocToolUtils - Retrieving Host-Selection Policies 2010-11-19 09:57:38,935 INFO DocToolSection - Processing section... Services 2010-11-19 09:58:19,249 INFO DocToolSection - Processing section... Policies 2010-11-19 09:58:19,255 INFO DocToolSection - Processing section... Provisioning Policies 2010-11-19 09:58:21,429 INFO DocToolSection - Processing section... Adoption Policies 2010-11-19 09:58:21,755 INFO DocToolSection - Processing section... Password Policies 2010-11-19 09:58:21,757 INFO DocToolSection - Processing section... Service Selection Policies 2010-11-19 09:58:21,758 INFO DocToolSection - Processing section... Recertification Policies 2010-11-19 09:58:21,958 ERROR DocToolProject - Error running report: java.lang.ClassCastException: com.ibm.itim.dataservices.model.policy.RoleTarget incompatible with com.ibm.itim.dataservices.model.policy.ServiceTarget at com.ibm.itim.doctool.runtime.policies.PolicyTargets.getListItems(PolicyTargets.java:37) at com.ibm.doctool.model.DocToolList.processItems(DocToolList.java:101) at com.ibm.doctool.model.DocToolList.processTemplateReport(DocToolList.java:63) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolIteration.processTemplateReport(DocToolIteration.java:85) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolSection.processTemplateReport(DocToolSection.java:123) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolSection.processTemplateReport(DocToolSection.java:123) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolProject.processTemplateReport(DocToolProject.java:254) at com.ibm.doctool.model.DocToolProject.runReport(DocToolProject.java:170) at com.ibm.doctool.runtime.report.DocToolReport.main(DocToolReport.java:99) 2010-11-19 09:58:21,966 INFO DocToolProject - Report Complete Thx, Michael.
Tr8shCan 270000FPYD 2010-11-19T11:19:54Z Hi, We have a problem running the great DocTool on AIXv6.1... The tools runs fine in Test environment, on PRD however, we get below output. Any ideas on what's wrong? 2010-11-19 09:57:19,095 INFO DocToolProject - Project Loaded 2010-11-19 09:57:19,301 INFO DocToolSection - Processing section... Properties 2010-11-19 09:57:19,604 INFO DocToolSection - Processing section... Roles 2010-11-19 09:57:19,639 DEBUG ITIMDocToolUtils - Retrieving Org Roles 2010-11-19 09:57:20,063 DEBUG ITIMDocToolUtils - Tenant DN is ou=EPT,dc=ept,dc=com 2010-11-19 09:57:35,605 DEBUG ITIMDocToolUtils - Retrieving Provisioning Policies 2010-11-19 09:57:38,323 INFO DocToolSection - Processing section... Organization 2010-11-19 09:57:38,345 DEBUG ITIMDocToolUtils - Retrieving ITIM Groups 2010-11-19 09:57:38,364 DEBUG ITIMDocToolUtils - Retrieving Services 2010-11-19 09:57:38,554 DEBUG ITIMDocToolUtils - Retrieving Identity Policies 2010-11-19 09:57:38,622 DEBUG ITIMDocToolUtils - Retrieving Password Policies 2010-11-19 09:57:38,674 DEBUG ITIMDocToolUtils - Retrieving Adoption Policies 2010-11-19 09:57:38,734 DEBUG ITIMDocToolUtils - Retrieving recertification Policies 2010-11-19 09:57:38,785 DEBUG ITIMDocToolUtils - Retrieving SOD Policies 2010-11-19 09:57:38,835 DEBUG ITIMDocToolUtils - Retrieving Host-Selection Policies 2010-11-19 09:57:38,935 INFO DocToolSection - Processing section... Services 2010-11-19 09:58:19,249 INFO DocToolSection - Processing section... Policies 2010-11-19 09:58:19,255 INFO DocToolSection - Processing section... Provisioning Policies 2010-11-19 09:58:21,429 INFO DocToolSection - Processing section... Adoption Policies 2010-11-19 09:58:21,755 INFO DocToolSection - Processing section... Password Policies 2010-11-19 09:58:21,757 INFO DocToolSection - Processing section... Service Selection Policies 2010-11-19 09:58:21,758 INFO DocToolSection - Processing section... Recertification Policies 2010-11-19 09:58:21,958 ERROR DocToolProject - Error running report: java.lang.ClassCastException: com.ibm.itim.dataservices.model.policy.RoleTarget incompatible with com.ibm.itim.dataservices.model.policy.ServiceTarget at com.ibm.itim.doctool.runtime.policies.PolicyTargets.getListItems(PolicyTargets.java:37) at com.ibm.doctool.model.DocToolList.processItems(DocToolList.java:101) at com.ibm.doctool.model.DocToolList.processTemplateReport(DocToolList.java:63) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolIteration.processTemplateReport(DocToolIteration.java:85) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolSection.processTemplateReport(DocToolSection.java:123) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolSection.processTemplateReport(DocToolSection.java:123) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolProject.processTemplateReport(DocToolProject.java:254) at com.ibm.doctool.model.DocToolProject.runReport(DocToolProject.java:170) at com.ibm.doctool.runtime.report.DocToolReport.main(DocToolReport.java:99) 2010-11-19 09:58:21,966 INFO DocToolProject - Report Complete Thx, Michael. More... Hello Tr8shCan. I am having the same issue on a Win2003SP2 box. Have you found a solution? 2010-12-02 13:40:34,353 INFO DocToolProject - Project Loaded 2010-12-02 13:40:34,400 INFO DocToolSection - Processing section... Properties 2010-12-02 13:40:34,634 INFO DocToolSection - Processing section... Roles 2010-12-02 13:40:34,650 DEBUG ITIMDocToolUtils - Retrieving Org Roles 2010-12-02 13:40:34,744 DEBUG ITIMDocToolUtils - Tenant DN is ou=xxxxx,dc=xxxxxx,dc=com 2010-12-02 13:40:37,540 DEBUG ITIMDocToolUtils - Retrieving Provisioning Policies 2010-12-02 13:40:54,572 INFO DocToolSection - Processing section... Organization 2010-12-02 13:40:54,587 DEBUG ITIMDocToolUtils - Retrieving ITIM Groups 2010-12-02 13:40:54,587 DEBUG ITIMDocToolUtils - Retrieving Services 2010-12-02 13:40:54,806 DEBUG ITIMDocToolUtils - Retrieving Identity Policies 2010-12-02 13:40:54,994 DEBUG ITIMDocToolUtils - Retrieving Password Policies 2010-12-02 13:40:55,212 DEBUG ITIMDocToolUtils - Retrieving Adoption Policies 2010-12-02 13:40:57,134 DEBUG ITIMDocToolUtils - Retrieving recertification Policies 2010-12-02 13:40:57,462 DEBUG ITIMDocToolUtils - Retrieving SOD Policies 2010-12-02 13:40:57,619 DEBUG ITIMDocToolUtils - Retrieving Host-Selection Policies 2010-12-02 13:40:57,728 INFO DocToolSection - Processing section... Services 2010-12-02 13:41:32,447 INFO DocToolSection - Processing section... Policies 2010-12-02 13:41:32,447 INFO DocToolSection - Processing section... Provisioning Policies 2010-12-02 13:41:51,197 INFO DocToolSection - Processing section... Adoption Policies 2010-12-02 13:41:51,197 INFO DocToolSection - Processing section... Password Policies 2010-12-02 13:41:51,212 INFO DocToolSection - Processing section... Service Selection Policies 2010-12-02 13:41:51,447 INFO DocToolSection - Processing section... Recertification Policies 2010-12-02 13:41:51,447 ERROR DocToolProject - Error running report: java.lang.ClassCastException: com.ibm.itim.dataservices.model.policy.RoleTarget incompatible with com.ibm.itim.dataservices.model.policy.ServiceTarget at com.ibm.itim.doctool.runtime.policies.PolicyTargets.getListItems(PolicyTargets.java:37) at com.ibm.doctool.model.DocToolList.processItems(DocToolList.java:101) at com.ibm.doctool.model.DocToolList.processTemplateReport(DocToolList.java:63) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolIteration.processTemplateReport(DocToolIteration.java:85) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolSection.processTemplateReport(DocToolSection.java:123) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolSection.processTemplateReport(DocToolSection.java:123) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolProject.processTemplateReport(DocToolProject.java:254) at com.ibm.doctool.model.DocToolProject.runReport(DocToolProject.java:170) at com.ibm.doctool.runtime.report.DocToolReport.main(DocToolReport.java:99
DocToolUser 270003R1TS 2010-12-02T21:50:48Z Hello Tr8shCan. I am having the same issue on a Win2003SP2 box. Have you found a solution? 2010-12-02 13:40:34,353 INFO DocToolProject - Project Loaded 2010-12-02 13:40:34,400 INFO DocToolSection - Processing section... Properties 2010-12-02 13:40:34,634 INFO DocToolSection - Processing section... Roles 2010-12-02 13:40:34,650 DEBUG ITIMDocToolUtils - Retrieving Org Roles 2010-12-02 13:40:34,744 DEBUG ITIMDocToolUtils - Tenant DN is ou=xxxxx,dc=xxxxxx,dc=com 2010-12-02 13:40:37,540 DEBUG ITIMDocToolUtils - Retrieving Provisioning Policies 2010-12-02 13:40:54,572 INFO DocToolSection - Processing section... Organization 2010-12-02 13:40:54,587 DEBUG ITIMDocToolUtils - Retrieving ITIM Groups 2010-12-02 13:40:54,587 DEBUG ITIMDocToolUtils - Retrieving Services 2010-12-02 13:40:54,806 DEBUG ITIMDocToolUtils - Retrieving Identity Policies 2010-12-02 13:40:54,994 DEBUG ITIMDocToolUtils - Retrieving Password Policies 2010-12-02 13:40:55,212 DEBUG ITIMDocToolUtils - Retrieving Adoption Policies 2010-12-02 13:40:57,134 DEBUG ITIMDocToolUtils - Retrieving recertification Policies 2010-12-02 13:40:57,462 DEBUG ITIMDocToolUtils - Retrieving SOD Policies 2010-12-02 13:40:57,619 DEBUG ITIMDocToolUtils - Retrieving Host-Selection Policies 2010-12-02 13:40:57,728 INFO DocToolSection - Processing section... Services 2010-12-02 13:41:32,447 INFO DocToolSection - Processing section... Policies 2010-12-02 13:41:32,447 INFO DocToolSection - Processing section... Provisioning Policies 2010-12-02 13:41:51,197 INFO DocToolSection - Processing section... Adoption Policies 2010-12-02 13:41:51,197 INFO DocToolSection - Processing section... Password Policies 2010-12-02 13:41:51,212 INFO DocToolSection - Processing section... Service Selection Policies 2010-12-02 13:41:51,447 INFO DocToolSection - Processing section... Recertification Policies 2010-12-02 13:41:51,447 ERROR DocToolProject - Error running report: java.lang.ClassCastException: com.ibm.itim.dataservices.model.policy.RoleTarget incompatible with com.ibm.itim.dataservices.model.policy.ServiceTarget at com.ibm.itim.doctool.runtime.policies.PolicyTargets.getListItems(PolicyTargets.java:37) at com.ibm.doctool.model.DocToolList.processItems(DocToolList.java:101) at com.ibm.doctool.model.DocToolList.processTemplateReport(DocToolList.java:63) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolIteration.processTemplateReport(DocToolIteration.java:85) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolSection.processTemplateReport(DocToolSection.java:123) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolSection.processTemplateReport(DocToolSection.java:123) at com.ibm.doctool.model.DocToolComponent.processChildren(DocToolComponent.java:465) at com.ibm.doctool.model.DocToolProject.processTemplateReport(DocToolProject.java:254) at com.ibm.doctool.model.DocToolProject.runReport(DocToolProject.java:170) at com.ibm.doctool.runtime.report.DocToolReport.main(DocToolReport.java:99 More... Nope, we are still having this issue. I had no reaction from anyone so far. Still waiting...
Hi All, We are facing the following error while running the doctool.Some issue is seen for password rule related. Note: We have customized the password policy to have a custom rule in password policy: Any pointers for the below error. Error: LDAP: error code 32 - No Such Object. java.lang.ClassNotFoundException: com.sce.idm.passwordrules.RegularExpressionRule at java.net.URLClassLoader.findClass(URLClassLoader.java:375) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at java.lang.Class.forName1(Native Method) at java.lang.Class.forName(Class.java:180) at com.ibm.passwordrules.standard.RuleFactory.createRule(RuleFactory.java:58) at com.ibm.passwordrules.standard.RuleSet.setRulesInfo(
Related Links
Webservice call from TDI via isim
ITIM- Java client not able to get the PlatformContext object using new InitialPlatformContext(env)
ITIM WS SOAP Response fails Validation
Custom adapter Test connection AL Error CTGIMT603E for webservice connection
Web Services Wrappers for ITIM API- New Application
Thread safety of client API
Webservices exception
Error while testing connection to ITIM Web Services v1.32
ISIM 6.0 webservice date issue
Web Services call to trigger Recon in TIM
Two loops in ITIM workflow are not working one by one
Anyone have ADT 5.1.2.4 working?
Session Timeout - Lost API Requests.
Accessinfo/CreateAccess TIM API\'s
New Thread Requests
READ THIS FIRST